I have just purchased a dx6i and a couple of ar6200 recievers for my king2 and 450 clone (still building). I havent had time to alter the king yet but have used the new Tx on pheonix and what a differance, I am flying circuits, 8`s, high wind, should I expect the same in real life, if so it shows how poor the E-sky tx is.
You shouldn't expect the same however you WILL notice a huge improvement in your flying ability, I remember when I first used the DX6i on a sim then on my first flight I had TG off and hovered out 3 packs, been flying - in a fashion - ever since. Just keep practicing and you will soon see how easy everything becomes.
Thanks Nik. I am direct with my answers, you have been warned
The DX6i is a great improvement, but do make sure you get the setup right as Phoenix assumes lots of those that you may have different in the DX.
Happy DX flying....
Ian Turner In the hanger: CopterX 450s SE V2 4 Belt CP's in various disguises 1 Airwolf with Belt CP mechs fitted. 1 Esky KOB for indoor fun Spektrum DX6i + AR6100's Check out http://www.chopperaddict.co.uk